The HGD-3000 H2 Hydrogen Gas and Smoke Detector is designed for unattended battery installations or remote shelters containing gassing lead acid batteries and charging systems. The HGD-3000 will turn on an exhaust fan when hydrogen gas levels reach 1% and will alarm at 2%. This alarm consists of a local 80db horn, a flashing red LED, and a dry contact switch closure for remote alarming.
The photoelectric smoke sensor detects minute combustion products from smoldering wire insulation, battery cases, and other material. When smoke is detected, a distinctive alarm is emitted from the 80db horn and a separate dry contact switch is activated. At this time, the exhaust fan is inhibited in order to deny the fire increased oxygen from outside air.
| Detection | Hydrogen Gas, Smoke, Temperature |
|---|---|
| Alarms | 10A Relay for Exhaust Fan, 1A Relay for Loss of Power, 1A Relay for Smoke Alarm, 1A Relay for Intrusion, 1A Relay for 2% H2 Concentration |
| Relay Connections | RJ45, Punch-Down Block |
| Mounting | (4) 4.5 mm (3/16 in) screws |
| Operating Environment | Temperature: -10 – 40 °C (14 – 104 °F) |
| Power Requirements | Standard: 85 – 265 VAC, 50/60 Hz Optional: 17 – 60 VDC |
| Compliance | IEEE Standard 450; National Protection Agency (NFPA) Article 64; NFPA 2: Hydrogen Technologies Code; Uniform Building Code (UBC) Section 6400; National Electric Code (NEC) Section 480.9 (A); NEC 501.125 (B); NEC 501.105 (1)-3 – use in Class 1 Division 2 Group B Meets UL Std. No. 61010‐1 3rd Edition and CAN/CSA‐C22.2 No. 61010‐1‐12(R2022) (DC model only) |
| Dimensions | 178 x 120 x 55 mm (7 x 4.75 x 2.5 in) |